PANEL ASSEMBLY
THE FOLLOWING INSTRUCTIONS SHOW HOW TO RELOCATE THE PINS IN LOUISVILLE COOLERS PATENTED PIN RAILS IF THE PANELS NEED TO BE RECONFIGURED FROM THE ORIGINAL DESIGN.
Step 1
Place ¼” x 1” roll pin in stand to hold pin while screwdriver is inserted. Position pin with slot up.
Step 2
Insert screwdriver into pin by tapping with hammer.
Step 3
Holding pin parallel to pin bar, insert into pin bar at predetermined
Step 4
Rotate pin 900 into track and remove screwdriver.
Step 5
Grasp Pin with pliers and rotate approximately 30 0 to lock into place (see drawing.)