Applications:

Replace damaged and worn Cooler and Freezer
Doors with ease.

Improve energy costs by replacing that gaping door. Improve energy costs by replacing that gaping door.

Enlarge existing openings to accommodate larger stock trucks and prevent future damage to your walk.

Create new access areas in existing Walk-ins.

METAL FINISHES: 26 gauge embossed galvalume is standard.

OPTIONAL FINISHES:

• Embossed Aluminum
• Smooth White Galvanized
• Embossed White Galvanized
• Stainless Steel

Specifications:

FRAMES: Frames are three sided for applications with no floor and 4 sided for applications with floor. Standard frame width is 5-1/2″.

HARDWARE: Cam lift hinges with nylon bearings, heavy duty handle with padlock provision, inside safety release and chrome finish.
GASKETS: Magnetic type replaceable, resistant to oils, fats, water and sunlight.

HEATERS: Freezers only are equipped with a 115 volt heater element concealed behind chrome strips on (G) sides and under threshold.

Heaters are readily accessible for field replacement. Junction box is located at the top.

INSULATION: Each door is filled with rigid foamed in place urethane having a thermal conductivity (k-factor) of 118 BTU/HR. square foot per degrees Fahrenheit/inch: and an overall coefficient of heat transfer (u-factor) of not more than
029. R-factor of 34. Insulation shall have
97% closed cell structure, with an average in place density of 2.4 pounds
per cubic foot.