THE FOLLOWING INSTRUCTIONS SHOW HOW TO RELOCATE THE PINS IN LOUISVILLE COOLERS PATENTED PIN RAILS IF THE PANELS NEED TO BE RECONFIGURED FROM THE ORIGINAL DESIGN.
-
- Place ¼” x 1” roll pin in stand to hold pin while screwdriver is inserted. Position pin with slot up.
-
- Insert screwdriver into pin by tapping with hammer.
-
- Holding pin parallel to pin bar, insert into pin bar at predetermined
-
- Rotate pin 900 into track and remove screwdriver.
-
- Grasp Pin with pliers and rotate approximately 30 0 to lock into place (see drawing.)
